A wide range of in-line feeders are being offered with the smallest one weighing 0.5 kg in total and the largest one mass 17 kg in total with a maximum permissible chute mass of 5 kg and the maximum chute length of 700 mm. The most recognizable feature is that, by setting the controller frequency, the necessity of adjusting the leaf spring is eliminated. Any directly mounted, intermediate spring, and rubber-support equipped types may be selected according to the application.
Features ofindividual types
Directly mounted type
A simple construction. The highest feed rate is attainable.
As the reactive force is directly transmitted to the mounting frame, however, this type is limited to compact feeders
Intermediate spring type
The feeder is installed bet ween the drive unit and the mounting frame via an intermediate spring to reduce the reactive force applied to the frame.
Capable of smoothly feeding medium and large-sized workpieces with less vibration.
Rubber support equipped type
The feeder is fixed to the frame with rubber supports to significantly reduce the reactive force so that it can even be used on a regular office-type desk.
Suitable for high-speed feeding of medium and large sized workpieces.
Đánh giá
Chưa có đánh giá nào.